VersaCraft Midnight Blue Ink Refill
Bring your VersaCraft ink pad back to life with this Midnight Blue ink bottle. Recharging your inks will extend their life and generate less waste. If you see that the stamp's print is no longer as vibrant as the first impressions, perhaps your ink needs a boost. Take out your bottle and recharge in a snap! As brand new :)
The midnight blue ink has a beautiful navy color that looks beautiful printed on nautical wedding invitations, and on the packaging of your beach brand accessories... It is a perfect option if you want a dark color but you are looking for something not as dramatic as black.
And how do I fill my ink pad? Before refilling the pad you have to shake the bottle and apply it evenly: from left to right, from top to bottom, and diagonally. Let it absorb for a while and it's ready to use.
VersaCraft ink is perfect for stamping on porous paper, natural fabrics like cotton or linen, unpainted wood, Japanese papers, and even unglazed ceramics.
If you use it on fabric, we recommend ironing the garment on the reverse, so it will withstand more washes. Iron it at a high temperature (the one that the garment allows) for about 15 seconds.
DETAILS
Ink Color: Midnight Blue
Quantity: 30 ml. (1 fl.oz.)
Multipurpose water-based ink. Pigment ink.
APPLICATIONS
Bottle ink refill is suitable just for VersaCraft ink pads. Ink pad suitable for fabric (natural fibers), wood, and uncoated paper. The paper has to be porous (normal paper, cardboard,...) for glossy surfaces you will need special ink. The color of the ink in the photograph may present a slight tonal variation with respect to the original due to the color of the different monitors. You will find some tricks on how to use this ink in the TIPS tab.
Specific References
BITERSWIT GUIDE: HOW TO USE AND CARE FOR YOUR STAMPS
Here’s our Biterswit guide with tips to care for your stamps and inks.
HOW TO USE FABRIC INK
The best fabrics for stamping this ink are natural fibers like cotton, linen, and silk. The ink sets with the heat of an iron and holds up best on cotton and linen, although keep in mind this is not a permanent ink. You can also stamp on rayon or polyester, but on synthetic fabrics the ink will be water-resistant, not washproof.
1. Apply the ink gently. You’ll waste less and get a cleaner print than if you press the stamp onto the ink pad like there’s no tomorrow. No need to overload it.
2. Always test your stamp on paper first. Try a few times until it looks just right. Practice makes perfect! Once it’s working well, re-ink your stamp and start stamping on fabric.
3. Let the fabric dry completely. To heat-set the ink, iron the stamped fabric on the reverse side for about 15 seconds. This helps the print last longer in the wash. If you skip the ironing, it’ll still hold up—just not as long. Tip: place a piece of cloth between the iron and your fabric. Recommended heat: Cotton/High setting.
4. For washing, use gentle cycles and cold water. Once the print fades after many washes, just go back to step 2 and stamp it again!
5. To heat-set VersaCraft ink on wood or terracotta, use a hair dryer.
HOW DO I REINK AN INK PAD?
1. Shake the ink bottle well (if it’s already open, make sure the cap is tightly closed first).
2. Apply the ink evenly over the pad—from left to right, top to bottom, and diagonally. Repeat this process twice.
3. Let the pad rest a few minutes so the ink can absorb properly.
* TIP: After applying the ink, you can use a plastic spoon or small spatula to gently press and spread the ink into the pad. Then apply more ink if needed.
IMPORTANT NOTES
* These instructions are for VersaCraft inks. If you’re using a different ink brand, check the manufacturer’s instructions.
* The longevity of your print depends on the type of fabric and wash temperature (natural fibers + cold water = best results). Keep in mind that this is a domestic ink and not 100% permanent—it will fade gradually with repeated washing.
* VersaCraft inks are suitable for fabric, wood, paper, and uncoated cardstock. For glossy surfaces, you’ll need a different ink. Be sure the ink is dry before touching the print.
STAMP CARE
In addition to the biterswit guide, we’ve also made a short video showing how to clean and store your Biterswit stamps properly.
VersaCraft Midnight Blue Ink Refill
TAMBIÉN TE GUSTARÁ
- -15%
Custom logo stamp Small and Medium
€19.00
€16.15
Now you can have a rubber stamp with your logo! With a custom logo stamp, you can make your DIY business cards, customize your packaging, the labels of your products, and customize envelopes and shipping boxes. With just one stamp, you can customize all the packaging sizes you have. If in the future you decide to change the packaging you will not have to...
VersaCraft Midnight Blue mini ink pad (paper, fabric, and wood)
€3.00
€3.00
This midnight blue VersaCraft Midnight mini ink pad is a great alternative to black ink if you don't quite like stamping in opaque black because it prints just as well on colored papers :) It is very chosen by mothers and fathers to mark their children's clothes because it is not as serious as black and works great on light clothes. Like all VersaCraft...
VersaCraft Midnight Blue ink pad (paper, fabric and wood)
€8.00
€8.00
Whenever we see this navy blue ink, marine prints come to our minds, this is one of our favorite ink pad colors :). This VersaCraft Midnight blue ink pad, like all the VersaCraft inks you can find in our selection of inks, is suitable for printing on non-glossy paper, wood, and natural fiber fabrics such as cotton, linen, or silk. It is an elegant blue...
Brown kraft labels (25 units)
€4.00
€4.00
Pack of 25 brown kraft cardboard labels to make your DIY business cards, labels for your handmade products, hang on your wedding gifts or to decorate Christmas and birthday gifts. These brown kraft labels are the perfect way to complete any project! With 25 units in each pack, you'll have plenty of labels to create a professional, cohesive look. The brown...