VersaCraft Burgundy Ink Refill
No more throwing out the ink pads! Now you can refill them with the VersaCraft refill bottles that you will find on our website. With this Burgundy bottle ink, you can reuse your ink pad as many times as you want. When the print is no longer as vibrant as it originally was, it's a sign that your ink needs a refill.
With the Ink Refill Bottle for VersaCraft Burgundy Ink Pad, you can ensure that your ink pad is always ready to use and that your stamped images are of the highest quality. Whether you're a professional crafter or just starting out, this ink refill bottle is a must-have tool in your crafting arsenal.
And how do I fill my ink pad? Before refilling the pad you have to shake the bottle and apply it evenly: from left to right, from top to bottom, and diagonally. Let it absorb for a while and it's ready to use.
VersaCraft ink is perfect for stamping on porous paper, natural fabrics like cotton or linen, unpainted wood, Japanese papers, and even unglazed ceramics.
If you use it on fabric, we recommend ironing the garment on the reverse, so it will withstand more washes. Iron it at a high temperature (the one that the garment allows) for about 15 seconds.
DETAILS
Ink Color: Burgundy
Quantity: 30 ml. (1 fl.oz.)
Multipurpose water-based ink. Pigment ink.
APPLICATIONS
Bottle ink refill is suitable just for VersaCraft ink pads. Ink pad suitable for fabric (natural fibers), wood, and uncoated paper. The paper has to be porous (normal paper, cardboard,...) for glossy surfaces you will need special ink. The color of the ink in the photograph may present a slight tonal variation with respect to the original due to the color of the different monitors. You will find some tricks on how to use this ink in the TIPS tab.
Specific References
BITERSWIT GUIDE: HOW TO USE AND CARE FOR YOUR STAMPS
Here’s our Biterswit guide with tips to care for your stamps and inks.
HOW TO USE FABRIC INK
The best fabrics for stamping this ink are natural fibers like cotton, linen, and silk. The ink sets with the heat of an iron and holds up best on cotton and linen, although keep in mind this is not a permanent ink. You can also stamp on rayon or polyester, but on synthetic fabrics the ink will be water-resistant, not washproof.
1. Apply the ink gently. You’ll waste less and get a cleaner print than if you press the stamp onto the ink pad like there’s no tomorrow. No need to overload it.
2. Always test your stamp on paper first. Try a few times until it looks just right. Practice makes perfect! Once it’s working well, re-ink your stamp and start stamping on fabric.
3. Let the fabric dry completely. To heat-set the ink, iron the stamped fabric on the reverse side for about 15 seconds. This helps the print last longer in the wash. If you skip the ironing, it’ll still hold up—just not as long. Tip: place a piece of cloth between the iron and your fabric. Recommended heat: Cotton/High setting.
4. For washing, use gentle cycles and cold water. Once the print fades after many washes, just go back to step 2 and stamp it again!
5. To heat-set VersaCraft ink on wood or terracotta, use a hair dryer.
HOW DO I REINK AN INK PAD?
1. Shake the ink bottle well (if it’s already open, make sure the cap is tightly closed first).
2. Apply the ink evenly over the pad—from left to right, top to bottom, and diagonally. Repeat this process twice.
3. Let the pad rest a few minutes so the ink can absorb properly.
* TIP: After applying the ink, you can use a plastic spoon or small spatula to gently press and spread the ink into the pad. Then apply more ink if needed.
IMPORTANT NOTES
* These instructions are for VersaCraft inks. If you’re using a different ink brand, check the manufacturer’s instructions.
* The longevity of your print depends on the type of fabric and wash temperature (natural fibers + cold water = best results). Keep in mind that this is a domestic ink and not 100% permanent—it will fade gradually with repeated washing.
* VersaCraft inks are suitable for fabric, wood, paper, and uncoated cardstock. For glossy surfaces, you’ll need a different ink. Be sure the ink is dry before touching the print.
STAMP CARE
In addition to the biterswit guide, we’ve also made a short video showing how to clean and store your Biterswit stamps properly.
VersaCraft Burgundy Ink Refill
TAMBIÉN TE GUSTARÁ
- -15%
Custom logo stamp Small and Medium
€19.00
€16.15
Now you can have a rubber stamp with your logo! With a custom logo stamp, you can make your DIY business cards, customize your packaging, the labels of your products, and customize envelopes and shipping boxes. With just one stamp, you can customize all the packaging sizes you have. If in the future you decide to change the packaging you will not have to...
VersaCraft Burgundy mini ink pad (paper, fabric, and wood)
€3.00
€3.00
Photos are not enough to show the pretty burgundy color of this VersaCraft Burgundy mini ink pad. You can get a more accurate idea of its color in the photos with the stamped labels and you can also see how the color of the paper you stamp the ink on affects its color. A beautiful deep and elegant wine color perfect for packaging and business cards for...
VersaCraft Burgundy ink pad (paper, fabric and wood)
€8.00
€8.00
This VersaCraft Burgundy ink pad is a gorgeous, deep wine color that's ideal for fancy packaging or making a totally unique print on gift wrap. The burgundy or maroon color is closely connected with femininity and imagination, so if your brand responds to these values, do not hesitate to stamp your logo with this beautiful ink. And this ink is not just...